Before buying a floor jack you may be desperately seeking the exact definition of a floor Jack.
It’s a mechanical device that lets you lift heavy loads by applying great force to the less physical effort. They have a screw thread or a heavy hydraulic force to help you to lift heavy loads.
They have versatile usages of a floor jack but the majority of uses of this floor jack is to lift automobiles or trucks. Basically, the floor jack is a wonderful tool for car and garage owners. If you are in these categories, then it lets you raise your vehicle without physical effort. When you need to change the brake pads of your car you obviously need a floor jack. It helps to maintain your car smoothly and without the risk of an accident. Professional mechanics and vehicle owners save their time and money by using a great floor jack. There are different models and types of a floor jack to ensure the performance. Each individual has different terms of performance, safety, and durability.
By mechanical terms and features, we can short the floor jack in some categories as well as Hydraulic Floor Jack, Scissor Floor Jack, Bottle of Piston Floor Jack.
Shortly we can consider it as a great mechanical combination to lift the heavy weight that is portable.
How to use floor jack?
It’s super easy to use a floor jack but the beginner just needs some tips to start using a floor jack. It may be easy if you follow these steps. These steps will help you to go through the right process. You should go through these steps. Because a wrong turn may be harmful to your car even or your body.
Step 1: Park your vehicle on a solid surface and remember that a flat surface is ideal in this case. Because on a flat surface floor jack stands well and does not sleep accidentally.
Step 2: Setup the wheel chocks on both sides of the tires of your vehicle that you’re working on. Make sure that your wheel chocks are fully engaged with tires. It’s very important to avoid any type of accident. It prevents rolling of your car.
Step 3: before going to work with a floor jack you must check and double check the condition of your floor jack. A small defect can cause the problem. Use your hand to check the engage and disengage performance. Don’t forget to check the jack stands and handles. If there is a noticeable defect; you must not use that floor jack before buying a new one.
Step 4: Do a read of the user manual and detect your vehicles jack point. It’s the point that is situated under your car. It’s capable of holding the weight of the vehicle when it is lifted.
Step 5: Place your jack under the jack point properly and lift the vehicle high enough for your work.
Step 6: When you have raised your vehicle with a floor jack with a floor jack and settled the jack stands with a good attachment now it’s time to place the jack stands properly under your vehicle. Adjust your jack stands to the proper height and then fit themselves underneath the recommended jack points. Be sure if the jack points are adjusted with your floor jack properly or not. If not please fix it because if they are not properly adjusted it may be a threat to your safety.
Step 7: Check the jack stands if they are strong enough. If they are strong enough remove the floor jack slowly and set aside.
Now your floor jack is ready. You may go under the car confidently and complete the regular maintenance tasks or repairs.
Note: Please pay attention to your work surface where you have placed your car. Avoid soft surfaces to be sure about your safety.
How do you release a floor jack safely?
After completing the maintenance job now you have to release the jack and store with regular maintenance. Be patient while releasing the jack. Remove all the tools from the vehicle. Place the saddles under the lifting points. Then turn the release screws gradually clockwise or counter clockwise. To raise the saddles a little bit above the saddles of the stands. Make the saddles position lowest and remove the jack stands. Then turn the handle again to lower the vehicle on the ground. Remember that you should not turn the handle more than two times. Then lower your vehicle completely and store your floor jack in a dry and safe position. One thing, keep it away from children.
What oil for the floor jack?
The demand of floor jack is increasing in the automobile industry from the third quarter of the previous century. Some people have a conventional concept that floor jacks oil is not available and you can use the brake fluid on your floor jack. It’s a totally wrong process and your machine can get damaged. Brake fluid ruins the seals of your floor jack. Do you want to lose the strength of your floor jack?
A floor jack requires hydraulic oil. The hydraulic system gets into life by this oil. There are available ISO 32 Hydraulic Oil in the marketplace. This kind of oil provides good lubrication. It will protect your jack from oxidation and your device doesn’t get rusted. The low foaming properties is also another great characteristic of this type of floor jack oil.
One thing, if you use brake oil, the warranty on your floor jack may void. So use a proper oil for a long-lasting performance.
Always use a quality floor jack. Always you should keep in mind that you are lifting over thousands of pounds. So be careful and do not proceed in the wrong way. Your small wrong attempt may cause serious injury even if it may cause death. It’s also important to keep your worthy automobile safe. You should practice minimum twice to be familiar with your floor jack.
Have a great lifting experience!